We appreciate your participation in this event, and once again, we would like to express our thanks to all participants.
Owing to the participants working in various fields, we could successfully finish our new product launching show about the Kwon3D XP held in the KBS Hall in January 11, 2006.
Actually, we started this event with much anxiety and fear due to its first trial of unexperienced field. In this regard, we would like to thank you again for your encouragement and supports.
We will do our best to produce excellent products through the consistent research endeavor.
In addition, we will reflect the opinions obtained through the direct contacts with customers so that we can produce new products in accordance with their diverse needs. Thus, we will respond to consumers’ encouragement by providing with the higher quality service than we do now. We would like to ask you to keep close eyes on our development of 3D Motion Analysis system and we expect your consistent encouragement for the good and rebuke for the bad.
We hope to convey all the best wishes to all participants
Thank you.
“ Kwon3D XP Training - Intermediate Course ” The 1st Kwon3D XP Training - Intermediate Course
We invite you to our Kwon3D XP Intermediate Training Course
We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2009 about the software usage and experimental environment for
the Kwon3D XP users.
Business Dept. 1VISOL,Inc.
▶ Date and Time: 10:00 ~ 17:00 February 27, 2009
The above training schedule may be changed. ▶ Location: Grand Conference Room in the Visol Company ▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP ▶ Preparation materials: one Notebook per person( higher version than Windows 2000 ) ▶ Preregistration:Contact person:Kim, Se-Na(0303sn@visol.net) Tel. 02)2612-2111 Fax. 02) 2612-0660
▶ Registration Information Preregistration is required to attend this training. Preregistration should be done as early as you can. Only 8 persons are permitted.
In case of the peoples have the same university, major and laboratory, only 2 people could be permitted.
▶ Registration Form Application Form for Kwon3D XP Training (refer to attached file)
▶ Direction By Subway 1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town
By Car
1. Seobu Expressway (West Cost Highway ) → (GwangmyeongCity Hall bound)
→ Trun left at the end of the GwangmyeongBridge → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station
We invite you to our Kwon3D XP Training for beginners
We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users.
Business Dept. 1VISOL,Inc.
▶ Date and Time: 10:00 ~ 17:00 November 28, 2008
The above training schedule may be changed. ▶ Location: Grand Conference Room in the Visol Company ▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP ▶ Preparation materials: one Notebook per person( higher version than Windows 2000 ) ▶ Preregistration:Contact person:Kim, So-Hee(international@visol.net),
Kim, Se-Na(0303sn@visol.net) Tel. 02)2612-2111 Fax. 02) 2612-0660
▶ Registration Information Preregistration is required to attend this training. Preregistration should be done as early as you can. Only 12 persons are permitted.
▶ Registration Form
Application Form for Kwon3D XP Training (refer to attached file)
By Subway 1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town
By Car
1. Seobu Expressway (West Cost Highway ) → (GwangmyeongCity Hall bound)
→ Trun left at the end of the GwangmyeongBridge → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station
“ The 21th Kwon3D XP Training for beginners ” The 21th Kwon3D XP Training for beginners
We invite you to our Kwon3D XP Training for beginners
We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users.
Business Dept. 1VISOL,Inc.
▶ Date and Time: 10:00 ~ 17:00 October 31, 2008
The above training schedule may be changed. ▶ Location: Grand Conference Room in the Visol Company ▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP ▶ Preparation materials: one Notebook per person( higher version than Windows 2000 ) ▶ Preregistration:Contact person:Kim, So-Hee(international@visol.net),
Kim, Se-Na(0303sn@visol.net) Tel. 02)2612-2111 Fax. 02) 2612-0660
▶ Registration Information Preregistration is required to attend this training. Preregistration should be done as early as you can. Only 12 persons are permitted.
▶ Registration Form
Application Form for Kwon3D XP Training (refer to attached file)
▶ Direction
By Subway 1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town
By Car
1. Seobu Expressway (West Cost Highway ) → (GwangmyeongCity Hall bound)
→ Trun left at the end of the GwangmyeongBridge → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station
“ The 20th Kwon3D XP Training for beginners ” The 20th Kwon3D XP Training for beginners
We invite you to our Kwon3D XP Training for beginners
We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users.
Business Dept. 1VISOL,Inc.
▶ Date and Time: 10:00 ~ 17:00 September 26 2008
The above training schedule may be changed. ▶ Location: Grand Conference Room in the Visol Company ▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP ▶ Preparation materials: one Notebook per person( higher version than Windows 2000 ) ▶ Preregistration:Contact person:Kim, So-Hee(international@visol.net),
Kim, Se-Na(0303sn@visol.net) Tel. 02)2612-2111 Fax. 02) 2612-0660
▶ Registration Information Preregistration is required to attend this training. Preregistration should be done as early as you can. Only 12 persons are permitted.
▶ Registration Form
Application Form for Kwon3D XP Training (refer to attached file)
▶ Direction
By Subway 1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town
By Car
1. Seobu Expressway (West Cost Highway ) → (GwangmyeongCity Hall bound)
→ Trun left at the end of the GwangmyeongBridge → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station
We invite you to our Kwon3D XP Training for beginners
We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users.
Business Dept. 1VISOL,Inc.
▶ Date and Time: 10:00 ~ 17:00 August 29, 2008
The above training schedule may be changed. ▶ Location: Grand Conference Room in the Visol Company ▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP ▶ Preparation materials: one Notebook per person( higher version than Windows 2000 ) ▶ Preregistration: Kim, Se-Na(0303sn@visol.net)
Tel. 02)2612-2111 Fax. 02) 2612-0660
▶ Registration Information Preregistration is required to attend this training. Preregistration should be done as early as you can. Only 12 persons are permitted.
▶ Registration Form
Application Form for Kwon3D XP Training (refer to attached file)
▶ Direction
By Subway 1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town
By Car
1. Seobu Expressway (West Cost Highway ) → (GwangmyeongCity Hall bound)
→ Trun left at the end of the GwangmyeongBridge → Rivervill APT → 6F Gwangmyeong Techno-Town
2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station
→ Rivervill APT → 6F Gwangmyeong Techno-Town
Warning: Division by zero in /home/hosting_users/kwon3d/www/skin_board/s_build_cafeblog/2_index.php on line 1230