Latest news  
       
Name Kwon3D
Date 07-May-2007 (15:40)
ㆍVote: 0  ㆍClick: 13120      
http://kwon3d.com/cafe/?kwon3d.241.17
“ Kwon3D XP, New Product Presentation ”
                                 
                                        ♥ Kwon3D XP, New Product Presentation ♥


We appreciate your participation in this event, and once again, we would like to express our thanks to all participants.
Owing to the participants working in various fields, we could successfully finish our new product launching show about the Kwon3D XP held in the KBS Hall in January 11, 2006.  
Actually, we started this event with much anxiety and fear due to its first trial of unexperienced field.  In this regard, we would like to thank you again for your encouragement and supports.  
We will do our best to produce excellent products through the consistent research endeavor.  
In addition, we will reflect the opinions obtained through the direct contacts with customers so that we can produce new products in accordance with their diverse needs.  Thus, we will respond to consumers’ encouragement by providing with the higher quality service than we do now.  We would like to ask you to keep close eyes on our development of 3D Motion Analysis system and we expect your consistent encouragement for the good and rebuke for the bad.
We hope to convey all the best wishes to all participants
Thank you.  
   

Warning: Division by zero in /home/hosting_users/kwon3d/www/skin_board/s_build_cafeblog/2_index.php on line 1230
  29
Name Kwon3D
Date 26-May-2008 (13:23)
Down1 Kwon3D_XP_Application.xls (15KB) (Down:1553)
ㆍVote: 0  ㆍClick: 24262      
http://kwon3d.com/cafe/?kwon3d.314.17
“ The 18th Kwon3D XP Training for beginner ”
The 18th Kwon3D XP Training for beginners

We invite you to our Kwon3D XP Training for beginners

We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users. 

Business Dept. 1   VISOL,Inc.

▶ Date and Time: 10:00 ~ 17:00  May 30, 2008

 The above training schedule may be changed. 
▶ Location: Grand Conference Room in the Visol Company
▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP
▶ Preparation materials: one Notebook per person( higher version than Windows 2000 )
▶ Preregistration:  Contact person:  Kim, So-Hee(international@visol.net),

  Kim, Se-Na(0303sn@visol.net)
  Tel. 02)2612-2111 Fax. 02) 2612-0660

Registration Information
  Preregistration is required to attend this training.  
  Preregistration should be done as early as you can. Only 12 persons are permitted.

Registration Form

 Application Form for Kwon3D XP Training (refer to attached file)

▶ Direction


 

By Subway
1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town

2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town

 

By Car

1. Seobu Expressway (West Cost Highway ) → (Gwangmyeong City Hall bound)

Trun left at the end of the Gwangmyeong Bridge → Rivervill APT → 6F Gwangmyeong Techno-Town

2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station

→ Rivervill APT → 6F Gwangmyeong Techno-Town


  28
Name Kwon3D
Date 08-February-2012 (17:03)
Down1 Kwon3D_Application.doc (24KB) (Down:2906)
ㆍVote: 0  ㆍClick: 24205      
http://kwon3d.com/cafe/?kwon3d.397.17
“ The 38th Kwon3D XP Training for beginners ”
  27
Name Kwon3D
Date 16-February-2010 (14:56)
Down1 Kwon3D_XP_Application.xls (19KB) (Down:2815)
ㆍVote: 0  ㆍClick: 24170      
http://kwon3d.com/cafe/?kwon3d.389.17
“ The 6th Kwon3D XP Training - Intermediate Course ”
The 6th Kwon3D XP Training - Intermediate Course


We invite you to our Kwon3D XP Intermediate Training Course

We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2009 about the software usage and experimental environment for        

the Kwon3D XP users. 

Business Dept. 1   VISOL,Inc.


▶ Date and Time: 10:00 ~ 17:00  February 24, 2009

 The above training schedule may be changed.  
▶ Location: Grand Conference Room in the Visol Company
▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP
▶ Preparation materials: one Notebook per person( higher version than Windows 2000 )
▶ Preregistration:  

     Contact person:  Kim, Se-Na(0303sn@visol.net)
    Tel. 02)2612-2111 Fax. 02) 2612-0660 


 Registration Information
  Preregistration is required to attend this training.  
  Preregistration should be done as early as you can. Only 8 persons are permitted.

  You need to pay for training fee ₩30,000  for this workshop . After registration, Pay for Training fee, registration will be done.

  In case of the peoples have the same university, major and laboratory,  only 2 people could be permitted.

 Registration Form
 Application Form for Kwon3D XP Training (refer to attached file)

▶ Direction
By Subway
1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town 

2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town


 

 By Car

1. Seobu Expressway (West Cost Highway ) → (Gwangmyeong City Hall bound) 

→ Trun left at the end of the Gwangmyeong Bridge → Rivervill APT → 6F Gwangmyeong Techno-Town

2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station 

→ Rivervill APT → 6F Gwangmyeong Techno-Town

  26
Name Kwon3D
Date 04-April-2008 (16:50)
Down1 Kwon3D_XP_Application.xls (15KB) (Down:1508)
ㆍVote: 0  ㆍClick: 24058      
http://kwon3d.com/cafe/?kwon3d.304.17
“ The 16th Kwon3D XP Training for beginner ”
The 16th Kwon3D XP Training for beginners

We invite you to our Kwon3D XP Training for beginners

We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users. 

Business Dept. 1   VISOL,Inc.

▶ Date and Time: 10:00 ~ 17:00  February 29, 2008

 The above training schedule may be changed. 
▶ Location: Grand Conference Room in the Visol Company
▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP
▶ Preparation materials: one Notebook per person( higher version than Windows 2000 )
▶ Preregistration:  Contact person:  Kim, So-Hee(international@visol.net),

  Kim, Se-Na(0303sn@visol.net)
  Tel. 02)2612-2111 Fax. 02) 2612-0660

Registration Information
  Preregistration is required to attend this training.  
  Preregistration should be done as early as you can. Only 12 persons are permitted.

Registration Form

 Application Form for Kwon3D XP Training (refer to attached file)

▶ Direction


 

By Subway
1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town

2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town

 

By Car

1. Seobu Expressway (West Cost Highway ) → (Gwangmyeong City Hall bound)

Trun left at the end of the Gwangmyeong Bridge → Rivervill APT → 6F Gwangmyeong Techno-Town

2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station

→ Rivervill APT → 6F Gwangmyeong Techno-Town


  25
Name Kwon3D
Date 13-March-2012 (11:20)
Down1 Kwon3D_Application.doc (24KB) (Down:2841)
ㆍVote: 0  ㆍClick: 24032      
http://kwon3d.com/cafe/?kwon3d.398.17
“ The 39th Kwon3D XP Training for beginners ”
12345678