All Topic  
       
Name Kwon3D
Date 04-April-2008 (16:51)
Down1 Kwon3D_XP_Application.xls (15KB) (Down:2383)
ㆍVote: 0  ㆍClick: 26608      
http://kwon3d.com/cafe/?kwon3d.305.
“ The 17th Kwon3D XP Training for beginner ”
The 17th Kwon3D XP Training for beginners

We invite you to our Kwon3D XP Training for beginners

We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users. 

Business Dept. 1   VISOL,Inc.

▶ Date and Time: 10:00 ~ 17:00  March 28, 2008

 The above training schedule may be changed. 
▶ Location: Grand Conference Room in the Visol Company
▶ For whom: Kwon3D XP Users or persons interesting in the Kwon3D XP
▶ Preparation materials: one Notebook per person( higher version than Windows 2000 )
▶ Preregistration:  Contact person:  Kim, So-Hee(international@visol.net),

  Kim, Se-Na(0303sn@visol.net)
  Tel. 02)2612-2111 Fax. 02) 2612-0660

Registration Information
  Preregistration is required to attend this training.  
  Preregistration should be done as early as you can. Only 12 persons are permitted.

Registration Form

 Application Form for Kwon3D XP Training (refer to attached file)

▶ Direction


 

By Subway
1. Get off on Gu-il Station → Cross the right Bridge on the station exit (Gwangmyeong-si bound) → Rivervill APT → 6F Gwangmyeong Techno-Town

2. Cheolsan Station, Exit 2 (Line No. 7) → Taxi (5 minutes) → Bus (6616,6638) → Get off the last stop (3 minutes) → Gwangmyeong Techno-Town

 

By Car

1. Seobu Expressway (West Cost Highway ) → (Gwangmyeong City Hall bound)

Trun left at the end of the Gwangmyeong Bridge → Rivervill APT → 6F Gwangmyeong Techno-Town

2. Nambu Circular Highway (Gimpo Airport bound) → Garibong road 5 → LG Gas Station

→ Rivervill APT → 6F Gwangmyeong Techno-Town


   
Body
The 38th Kwon3D XP Training for beginners

 [2012/02/08 17:03]
The 29th Kwon3D XP Training for beginners
The 29th Kwon3D XP Training for beginnersWe invite you to our Kwon3D XP Training for beginners We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2010 about the software usage and experimental environment for the Kwon3D XP users.  Business Dept. 1   VISOL,Inc. ▶ Dat...

 [2010/03/10 16:19]
The 12th Kwon3D XP Training for beginner
The 12th Kwon3D XP Training for beginners We invite you to our Kwon3D XP Training for beginners We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2007 about the software usage and experimental environment for the Kwon3D XP users.  Bus...

 [2007/10/01 10:41]
The 11th Kwon3D XP Training for beginner
Kwon3D XP Application.xls(15KB) The 11th Kwon3D XP Training for beginners We invite you to our Kwon3D XP Training for beginners We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2007 about the software usage and experimental environment fo...

 [2007/08/16 18:45]
VISOL Multi Net Express
  Development of the VISOL Multi Net Express System for notebook users and completion to supply them to OMG Ltd. in China.Two Visol MotionMaster 100 cameras at the same time by making use of 4 pin 1394 port and PCMCIA embedded in notebook or express 1394card.   We developed the system to capture from 30 up to 300FPS and completed supplies of...

 [2007/12/05 17:54]
The 14th Kwon3D XP Training for beginner
The 14th Kwon3D XP Training for beginners We invite you to our Kwon3D XP Training for beginners We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2007 about the software usage and experimental environment for the Kwon3D XP users.  Bus...

 [2007/12/05 11:56]
Kwon3DXP manual
1. Introduction 2. Working with body models 3. Working with experimental protocols 4. Working with analysis protocols 5. Working with calibration trials 6. Working with motion trials 7. Working with reports 8. Appendix(Capturing video from DV camcorders) 9. Appendix(Acquiring analog data) 10. Appendix(Importing C3D files)

 [2008/06/04 11:04]
The 39th Kwon3D XP Training for beginners

 [2012/03/13 11:20]
The 6th Kwon3D XP Training - Intermediate Course
The 6th Kwon3D XP Training - Intermediate Course We invite you to our Kwon3D XP Intermediate Training Course We appreciate your consistent interest and encouragement, We will have a plan to provide a training course in 2009 about the software usage and experimental environment for         the Kwon3D XP use...

 [2010/02/16 14:56]
The 13th Kwon3D XP Training for beginner
The 13th Kwon3D XP Training for beginners We invite you to our Kwon3D XP Training for beginners We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2007 about the software usage and experimental environment for the Kwon3D XP users.  Bus...

 [2007/11/09 14:02]
The 17th Kwon3D XP Training for beginner
The 17th Kwon3D XP Training for beginners We invite you to our Kwon3D XP Training for beginners We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2008 about the software usage and experimental environment for the Kwon3D XP users.  Bus...

 [2008/04/04 16:51]
[New Update Version]Kwon3DXP ReportViewer
New Update Version!! Kwon3D XP ReportViewer

 [2008/09/19 17:21]
Asian Confederation
                          August 29th ~ September 1st, 2008 in Chiba, Japan  VISOL,Inc. will be attending the the Asian Confederation for Physical Therapy We’ll display the Kwon3D Motion Analysis System. Contact James ...

 [2008/07/31 14:03]
The 43th Kwon3D XP Training for beginners

 [2012/07/09 11:11]
The 20th Annual Congress of the Japanese
       August 27, 2008    We'll held the Luncheon Seminar & Workshop    at The 20th Annual Congress of the Japanese    Society of Biomechanics.     Contact James Park for further information.   

 [2008/07/31 13:38]
The 15th Kwon3D XP Training for beginner
The 15th Kwon3D XP Training for beginners We invite you to our Kwon3D XP Training for beginners We appreciate your consistent interest and encouragement, and hope you have a Happy and Fruitful New Year. We will have a plan to provide a training course in 2007 about the software usage and experimental environment for the Kwon3D XP users.  Bus...

 [2008/04/04 16:49]
12345678