A/D Sync Box
 
The VISOL A/D Sync Box is specifically designed for use with KwonGRF.
The A/D Box contains an A/D board (Data Translation's DT9800 series) and
triggering-related circuits. The plate channels and additional channels must be
connected to the A/D box and the A/D converted channel data will be sent to
the host computer via a USB (Universal Serial Bus) cable.

Sub Item
 
1. LED Units : LED units are for the synchronization with the cameras.
                    The LED units must be connected to the LED connectors on the front panel.
                    Up to 4 units can be used at once.

2. Photocells/Reflectors : Photocells are used for triggering and synchronization purpose.
                                     Photocells must be connected to the Sensor Input connectors                                      Up to 2 photocell units can be used.

3. Manual switch : Manual switch is for starting signal data acquisition . The manual
                           switches, photocells, or external trigger sources will turn on all